The circuit breaker is automatically operated. The circuit installation in Irmo, SC will ensure that an automatically operated switch will always be attached. The electrical switch is designed to protect the electrical circuit. It must protect the circuit from damage. This damage would usually have occurred as a result of an electrical overload or short circuit. But do note the basic function of the circuit breaker.
The basic function of the circuit breaker is to interrupt current flows. This would happen usually after a fault has been detected. It is not the same as a fuse. The fuse is in operation once-off and thereafter would need to be replaced. But circuit breakers, by and large, are designed to last a whole long time. In the interim, without having to replace it, the circuit breaker could merely be reset. This resetting exercise could be done manually or automatically.
After the resetting is completed, usual electrical operations may resume. Circuit breakers of course come in different sizes. You will find the smallest of devices that are designed to protect low current using circuits or your everyday household appliances. The largest of the circuit breakers are also known as switchgears. These would be designed to secure high voltage circuits which, in turn, could be designed to provide a whole city with its power.
Generically speaking, the circuit breaker acts out as an automatic process of removing power from a faulty system. While features are common, they will differ in accordance with current ratings, voltage classes, as well as the actual type of circuit breaker. And that, in a nutshell, completes your basic summarized and brief introduction to the circuit breaker. The writer does hope that this provided information is going to be useful.